Marble polishing and etching are commonly misunderstood. Those dull “water spots” and “glass-rings” (etch marks) are baffling. And infrequently folks maintain false assumptions and have incorrect concepts about how to polish marble or how marble polishing of Orlando is actually performed to create a shiny surface finish.
Many assume that the shine or polish on marble comes from applying a potion, lotion or chemical throughout marble cleaning.
Also, some imagine that each one marble is supposed to be shiny and that the boring etch marks are some sort of “stain”.
Properly, not one among the above is true, however a few of it’s not totally false both, which requires some explanation… right here we go!
It’s not surprising there’s confusion surrounding the topic of marble polishing since the time period “polish” has a quantity of subtly completely different meanings within the stone industry.
Most frequently what is meant by “polish”, “polished” or “sharpening” is in reference to the kind of “finish” on marble, travertine, limestone, granite or any natural stone.
Natural stone may be completed with quite quite a bit of different surface varieties, kinds or looks relying on what is wanted by the buyer.
A “polished” end is the shiny, excessive-gloss kind of end with the deepest color saturation commonly seen on marble and granite countertops.
As a consequence of a polished/shiny finish is so frequent, many individuals consider that each one marble is supposed to be polished or shiny.
Nonetheless, as famous above, marble (or nearly any stone) can have quite a few different finish types.
A “honed” finish is satin-smooth, however is not reflective or shiny and the colours are extra muted. It is sometimes called a “matte” finish.
Other surface finishes embrace: tumbled, flamed, antiqued, brushed, hammered and more. Each of these has a different look, nonetheless all of them are non-reflective. Solely a “polished” finish has the excessive-gloss, shiny surface.
It is vitally frequent for marble floors to have a honed finish since it’s simpler to maintain. And even though colors are extra muted with a hone finish, many stone colours and patterns are extra appealing with a honed finish.
A shiny polished finish will put on down with foot traffic creating boring trails around the floor. Also, mud and filth are seen far more easily on a refined floor.
Generally individuals buy a home with a honed ground and mistakenly suppose that one thing is improper with it as a result of it appears uninteresting compared to the shiny marble seen in accommodations, etc. They cause that it needs to be shiny, or it simply wants “polishing” with a marble “polish”. Let’s clarify….
It is a frequent myth that the shine on marble counter tops and ground tile is achieved by applying some kind of chemical or “polish” to the surface. Not exactly. The “shine” on marble is simply not something that sits on high of the marble… it’s part of the marble itself.
While there might be one situation (etching – see under) where a chemical compound can be used to polish marble, it makes use of as bodily process (like sanding wood) to convey again the shine. The chemical itself doesn’t supply the shine.
Also, this specialised product is engineered to work on marble (travertine or limestone too) that was initially polished to a shine. So, it restores a damaged shiny end, however is insufficient to create that shine from uncooked marble to begin with.
The shiny polish seen on marble slabs, tile and other stones is achieved by excessive friction on large stone sprucing machines on the manufacturing unit long before it gets to a show room or customer.
A sure finish can be changed or re-finished after set up, but this requires the talent of an experienced marble repair professional using particular tools, abrasives and a multi-step process… not just a wipe down with a chemical or “polish”.
Thus, creating a selected finish on marble (or any stone) or sharpening marble to make it “shiny” isn’t a DIY job.
Nevertheless, let me explain the subtle distinction that arises with the problem of etching.
Mystery of Marble Etching
Marble (travertine, limestone and any “calcitic” stone too) is sensitive and reactive with sure kinds of foods, merchandise and chemical substances, which can injury the surface finish leaving uninteresting and/or lighter-coloured whitish spot often described as a “water spot”, “water stain”, “glass-ring”, or “ghost stain”.
So, if you happen to spill acidic orange juice (or any of the various different acidic foods and drinks) on marble it would corrode the surface. This corrosive chemical reaction will essentially eradicate the shiny floor layer achieved from the marble polishing process described above revealing the dull marble underneath.
Likewise, if you use the incorrect products for cleaning marble (too acidic or too alkaline) you’ll be able to destroy the shiny end over the whole floor making your whole marble countertop or ground “boring”.
Etching begins on contact and the longer the publicity the extra severe the etching.
And sealing doesn’t forestall etching. You need to stop contact with the reactive substances.
An etch mark is simply not a stain. Nothing has absorbed into the marble. Also, plain water (unless acidic like some nicely and city water provides) doesn’t cause it. Etching and staining are two utterly different processes.
It’s possible you’ll hear or learn that “marble stains easy”. Truly marble doesn’t stain easily… it “etches” easily and most (together with many within the stone industry) do not know the difference.
Here is the twist about how a shiny end is created and the way marble polishing is done…
As noted above, the original finish (it would not matter what kind) is done “at the manufacturing unit” with machines. Applying some potion or chemical doesn’t do it.
However… a previously polished marble countertop or tile that has boring spots from etching can be repaired rather easily using a nifty DIY marble polish made specifically for this purpose.
Repairing Etch Marks
The Etch Remover Marble Polishing
product is very effective for restoring small areas of delicate to reasonable surface damage. It won’t take raw marble and make it shiny or “polish” it, nor is it actually appropriate to re-end a honed marble so it is polished and shiny.
It will make a honed marble shiny, but it isn’t made to be used by a homeowner to re-end a big space like a ground or total countertop.
It is easy to see why this subject creates such confusion and misunderstanding. The long and brief is that whatever finish you need on your marble (shiny, flat, tough, rustic) it is initially done on the manufacturing unit, by a talented professional prior to install or as a marble repair.
Once more, a end may be modified as soon as put in, however that may very well be a demanding job that requires particular abrasives, instruments and the ability of an experienced stone restoration professional. It isn’t a DIY job… not even for the best of handymen.
Additionally, any end type you find on marble (say in an existing residence you buy) is most likely going the original finish.
Whether it is “uninteresting” or honed, then probably that’s the best way it is purported to be and it doesn’t “want sprucing”.
Although, it might have been etched through the use of the fallacious marble cleaning products, however that is the one time it ever “needs” marble polishing.
After all, in the occasion you’d somewhat have a shiny polished finish, then you probably can have a honed floor polished right into a shine by knowledgeable, however there is nothing “fallacious” with the honed floor.
The Etch Remover Polishing product restores boring spots on polished marble, as noted above.
Honed marble etch marks require a unique procedure. No product exists to make use of on a honed surface.